Category Archives: Uncategorized

How to Build Fence Columns: A Guide

Iron fence with stone columns.

When to Choose Fence Columns

When you’re fencing acreage to keep cattle in, you use barb wire and steel posts. When you’re fencing a basic backyard, the standard chain link fencing or wooden privacy fencing is the standard. But when you’re fencing the front yard of a home or the front of a business in wood or wrought iron, something about stone fence columns adds the perfect touch. 

A fence with a stone column is a method of not only creating a beautifully designed fence but also provides stronger support for the fencing. Stone fence columns reduce settlement while increasing load-bearing capacity. They accelerate soil consolidation with the granular materials used to install them that encourage drainage. When fencing is installed on property with a slope, stone fence columns improve the stability and increase the soil’s strength.  

What is a stone column foundation? 

General contractors are often faced with needing to construct deep foundations for multi-story structures. This is an expensive and time-consuming process that can throw them off-budget and late making their deadline. A stone column foundation, which is similar to stone fence columns but underground instead of above ground, is a solution they turn to. 

Foundations built with stone columns can reduce the use of spoils and prevent soil settlement. This is often inspected and advised by a geotechnical company that will design the cost-effective treatment and installation to meet the general contractor’s needs.

How durable is a stone column and wood fence? 

To create an inviting entrance for visitors, a wooden fence with stone fence columns can be the perfect touch. While wood fencing has been known to rot, by supporting that with stone fence columns, you’re keeping that wood off the ground and protecting, making it more durable than ever. Other than durability, other reasons that stone fence columns with wooden fencing are: 

  • Individual Style Showcase 

Stone fence columns can be constructed in different shapes and sizes, making it easy to showcase “your” style. The wooden rail fence around your home creates the boundary and the stone fence columns keep that statement stable. Go with a traditional rugged look or have larger oversized stones used to create larger stone fence columns to establish your home as your castle. 

  • Structural Support

If your wooden fencing will have gates, they can get heavy for the standard fencing columns and posts. Using stone fence columns on each side of the gate will provide strong structural support and keep it in a style that is yours. 

  • Hiding Gadgets

Stone fence columns can hide the gadgets that are a part of your command station. The equipment like the automatic gate opener and the intercom system can be hidden by stone fence columns. Stone fence columns make an ideal place to install the mailbox, eliminating the possibility of vandalism, an ideal solution in rural areas. 

Can you add a stone column around a post?

Absolutely, and there isn’t any better way to make a weathered wooden post look beautiful than building stone fence columns around them. For a 6×6 size wooden post, there are stone fence column kits available, each stone comes labeled as A, B, C, and D. The instructions will walk you through the process so that your stone fence columns come out perfect, creating that beautiful accent to your home and fencing. 

The stones will fit like puzzle pieces, with stone A being the starting stone and the stones labeled D will be the finishing stone. In between A and D is a matter of simply attaching the subsequent stones of A to B to C and to D as instructed, stacking, and repeating the process. 

Finishing off the stone fence columns with stone column caps then gives you custom-designed stone fence columns, hiding the weathered and worn wooden posts. To make this easier, hiring a professional fencing contractor that specializes in stone fence columns is always possible. 

Which is best: stone column vs concrete column?

Builders and contractors have searched for years on better ways to build columns, whether it is for fencing and structure support. We all must agree that anything we use today is better than the tree trunks of yesteryear. 

Stone fence columns give us that timeless appeal of permanence and quality, for residential or public fencing. Often stone fence columns are requested to match the façade of the structure it graces and surrounds. When properly built and installed with professional stone column equipment by a contractor that knows how to repair stone columns, it will last for many, many years. 

GFRC fence columns (glass fiber reinforced concrete) include lightweight fibers that greatly increase the quality of the precast concrete. This is a process commonly used today for architectural elements, exterior and statuary components, like limestone simulated wall panels. With long and short lengths manufactured, the high-strength glass fibers that are embedded in the concrete matrix give the columns an added tensile strength that has ultimate load-bearing capacity. 

Metal fence with red brick columns.

In Conclusion

While the concrete columns may provide a stronger substance underground, the stone fence columns will give a decorative outward appearance. Stone fence columns are an addition to any architectural style of homes or businesses that can provide usefulness too. To learn more, reach out to Ware Fencing at 817-948-4503 today.

Are Electric Fences Easy to Install?

electric fence

What is electric fence installation?

Electric fences are essential on farms and ranches for keeping livestock in and other critters out. For small operations, the farmer or rancher may pay to have a professional electric fence installation. For farms and ranches that are out further in rural or unincorporated areas though, sometimes you have to do things yourself, like electric fence installation

An electric fence installation is installed as an incomplete electrical circuit. Then, when cattle, horses, or human touch the wire, the electrons within the wire escape to the soil. The electrons are then drawn up from the soil and replace the lost electrons from the wire. This process completes the electrical circuit.

Now, we’ll answer some questions on how to install an electric fence at home, which doesn’t have to be on a farm or ranch. However, you’ll want to check with local authorities before doing or having an electric fence installation in the city. Knowing how to properly install an electric fence is important so that you don’t cause harm to anyone or anything that wasn’t intended, and not to cause damage to your property. 

The first question many ask is, are electric fences easy to install?

Once you have decided that an electric fence is what you need, you need to know wow electric fence installation is done, and the following steps will walk you through the process. First, you need to make sure you have the following equipment and tools for your electric fence installation: 

  • Metal fence wire
  • Electric charger for a wire fence
  • T-posts and support posts
  • In-line strainers
  • A weed eater

Step 1. Lay The Fence Line Out

Start by laying out the fencing where you want it. This means you’ll need to clear the area of any trees, fallen tree branches, tall weeds, etc. You don’t want anything in the way that could make your electric fence installation ineffective by shorting it out. Use the weed eater to knock down the tall grass and weed and use loppers to cut back trees or branches that could be in the way. 

Step 2. Insert Posts and Prep for the Gate

Place wooden posts at the planned corners of the fenced area and where the gate will be installed. You should also place a wooden post midway of each fence run and then metal T-posts every 10 to 20 feet. 

Step 3. Hang the Gate

With the T-posts installed, hang the gates.  

Step 4. Insert the Support Posts

With the round wooden posts and T-posts installed, it is time to insert the support posts every few feet between the T-posts. These posts will ensure that the electric fence wire doesn’t drag or hit the ground.

Step 5. Run the Fence Wire

The part of running the wire isn’t easy, but it is the crux of the whole project. Stretch the wire between the wooden posts then connect the wire to the electrical connectors that are installed on the T-posts and wooden posts. Place the wire in the correct slots of the support posts, making sure each strand is connected to the same rung of the connectors and support posts. Repeat this process until all wire is strung and in place. 

Step 6. Pull The Wire Tight

It can’t be stressed enough how important it is for the wire to be pulled tight. The goal is not to have a sloppy looking fence and to make it as effective as possible. A nimble critter could jump over a sagging fence line. 

Step 7. Connect the Charger

A solar powered charger will work but the voltage isn’t as strong as the standard charger. Follow the instructions that come with the charger on how to install the unit. 

Step 8. The Ground Rods

Now, insert ground rods, making sure you have plenty, so your electric fence installation works well with the proper current needed. 

Now, test it all to make sure you have the right voltage to your electric fence installation. It is recommended to do this with rubber sole shoes, so you don’t get shocked. 

Does an electric fence have to make a complete loop?

No, your electric fence installation does not need a complete loop. However, the benefit to this is the voltage to the fence line is increased with a continuous loop. 

How deep does a ground rod need to be for electric fence?

The majority of grounding rods are made from either copper or galvanized steel, and the wire that connects the energizer to the ground rods must be identical to the rod. This reduces any electrolysis performance reduction.

The more output a charger has, the more grounding rods you will need. The general rule it 3 feet ground rod for every joule output. A minimum of 10 feet should be spaced between each one. 

electric fence end

Can you dead end an electric fence and can electric fence touch itself?

Yes, class 3 or higher galvanized steel. You can use insulated or non-insulated dead-ends, and they can be used on barbed wire or smooth fence wires in 4 different sizes. In regard to an electric fence touching itself, you want to complete your electric fence installation, so this doesn’t happen. What happens if it does? Too much power could be going through the wire and do less good than it should. Call 817-948-4503 today for your electric fence installation in Crowley and Fort Worth, TX.

How to Care for Your Wrought Iron Fence and Gate

Wrought iron fencing system

How do you take care of wrought iron?

Wrought iron is a beautiful and mysterious material used for many things like indoor and outdoor décor and wrought iron fences. Wrought iron is obtained from a smelting process. This is a ductile, fibrous,  soft material made from semi-fused mass of comparatively pure iron globules and surrounded partially by slag. While the description doesn’t make it sound beautiful, when a wrought iron fence is made from this material, it transpires into something astounding, whether it is indoor décor or your outdoor wrought iron fence.

Sometimes it is the finishing a home needs in the front yard, and wrought iron fence is just the answer. A wrong iron with gate can set up the boundary of your property and the gate says visitors are welcomed. You may be thinking, “Does wrought iron rust?”, and the answer is yes, but with proper care and maintenance, you can keep your wrought fence looking good.

It isn’t complicated or difficult to care for wrought iron fence, and it doesn’t have to be done as often as a wood fence needs to be cared for.  You should thoroughly wash your wroughtiron  fence twice a year with mild soap and water. Then let it sit out to dry thoroughly and when completely dry, spray an automotive spray wax over the wrought iron fence.

How can wrought iron be prevented from rusting?

A wrought iron can make a beautiful, impressive look to a home, giving it a sense of elegance as well as providing a boundary guide. You can  add in-ground lighting along it to showcase it at night even, making it look even more grand than it already does.

One of the downsides to a wrought iron fence are the carbon atomsin the material. When dirt, grime, or moisture come in contact with the wrought iron fence, it rusts, quickly. So, this means the care and maintenance we mentioned earlier are necessary if you want your wrought iron fence to remain looking as prestige as possible.

 Because wrought iron fence tends to rust,  choose one of the many protective products on the market and apply to your fence. There are epoxy enamels, zinc-based primer, and silicone-based products that will slow the rusting process down.

Be prepared for this preventive measure to take some time because each of these rust preventing products takes time to thoroughly dry. You want to choose a time where there isn’t any rain in the forecast for 2 to 3 days and if possible, sunshine on the fence as you work.

closeup of wrought iron fence

How do you remove rust from wrought iron?

Do all wrought iron fences have to be black, old, and rusty looking?  Or can I paint wrought iron?

Yes, a wrought iron fence, or even decorative wrought iron pieces can be painted.  Whether you’re wanting to paint your wrought iron fence to give it personal touch or because over time of being exposed to the weather and is pitted and rusty. Follow these steps for the ideal painted wrought iron fence:  

  • Step One: Get It Ready: Pick a day that is dry and warm. The wrought iron fence itself needs to be dry and the humidity needs to be under 80%. If the temperature is cooler than 50 degrees, paint in the direct sun. Cover any areas that you don’t want painted, like the grass, sidewalks, etc., with drop cloths or tarp. Use large pieces of cardboard or wood to shield the area around the fence from overspray in the air.
  • Step Two: Remove Old Finish & Rust: Clean the wrought iron metal with a 50/50 solution of vinegar and water and a scrub brush to remove the dirt and grime. If the wrought iron fence has mildew or mold on it, use a 50/50 solution of bleach and water. For your paint to adhere to the wrought iron fence, remove the old paint and rust from the surface and any loose flakes. Light sanding  will raise the surface for better pain adhesion. A stiff wire brush is excellent for removing old paint and rust. While wearing goggles and mask, using a rust dissolver will remove the rust remnants the wire brush didn’t get, simply follow the instructions provided by the manufacturer.
  • Step Three: Apply a Primer: Spray the wrought iron fence  with a primer made for metal. An aerosol primer and paint provide a smooth coverage with some touchups by brush, like some of the intricate wrought iron fence parts and the detailed wrought iron fence designs.  The primer should be thoroughly dried before you start painting. Apply 2 coats with a back-brush method that allows the paint to dry before going over it again.
  • Step Four: Apply the Paint: Spray a coat of your paint, holding it eight to twelve inches away from the wrought iron fence and keep your can moving so you don’t drip excess paint on the fence. Wait one hour before applying the second coat.

If your home already has a wrought iron fence, this article can help you bring it back to life and improve your home’s outdoor aesthetics.  If you’ve been thinking about a decorative way to border your front lawn, a wrought iron fence is a beautiful way to accomplish this. Need installation or treatment for your wrought iron fence in Crowley and Fort Worth, TX? Call 817-948-4503 today!

What is the best type of fence for a house?

wooden fence

Do I need a permit to put a fence around my yard?

It has been said that fences make the best neighbors, but is that your concern for your home fence plans? Depending on where you live will determine the residential fence design best suited for your home fence. 

When deciding on the design and style of a residential fence and gate system, homeowner have several questions, understandably.  We’re going to answer a few of them here base on answers from several residential fence companies and residential fence builders that focus on home fence designs and needs.

This can depend on where you live.  A home fence is considered to be a permanent and prominent fixture, creating a visual impact on the property and surrounding neighborhood. If you live within city limits or within a development, building a home fence without a permit could get you cited and fined. 

There are zoning laws within most municipalities that enforce the height, materials, and sometimes the style of a home fence. This is especially so for houses in a historic district. The city office will have a P&Z department (planning and zoning), which is where building permits are usually filed and processed. 

Once your plans have been approved, you’ll be given a piece of paper that should be placed in a prominent place that shows you have the city’s permission. You will also be given documents with the regulations and rules as they apply to your home fence request. 

What is the easiest fence to install?

There styles and types of home fences are many, so we’re going to look at three of the most popular choices, all of which can be installed by a homeowner that is DIY driven and trying to save a few dollars: 

The Picket Fence

An American classic seen in almost every Hallmark or Lifetime movie and television show. This borders your property for clear message “this is my property”, yet still allows you to be neighborly and chat with others in your neighborhood. 

Wood was used for the picket fence for decades, but today, vinyl is the preferred material. It is durable but lightweight and easy to install. The fence posts can be installed in a few hours and then the vinyl pickets are inserted into pre-made slots. With one day for most homes, you have a beautiful home fence that will last for year with little maintenance. 

The Privacy Fence

The privacy fence is a popular home fence style, installed by a contractor or by the homeowner.  With a wide choice in colors, designs, heights, and styles, this home fence can match any architectural style for a moderate expense. 

The vinyl is a modern material that provides reliability at a good value. A vinyl privacy home fence offers privacy when there is a swimming pool, keeps the backyard safe, and provides a level of protection from the wind. Installing a vinyl privacy home fence only requires one tool that isn’t in the typical homeowner’s tool box: A vinyl notching tool. After purchasing that one tool, a homeowner will find that the vinyl privacy home fence is easy to install and will give you years of enjoyment. 

The Ornamental Iron Fence

This will give you a beautiful and stylish home fence that will make your home and property stand out from the others on the block. A misconception about an ornamental iron home fence is the level of difficulty to install the fence.

Today’s ornamental iron is light weight, making it easy to work with, and with the new bracket system on the market, installation is simple. Get the fence posts set and then the nut and bolt bracket system will go quicker than you may think. Still, if you’re not comfortable working with the material, calling a professional home fence company is always an option.

wooden horizontal fence

Can you build a fence without sinking posts?

If so, how do you secure a fence post without concrete?

If you’re concerned about having to sink post for a temporary fence, there is a work-a-round using heavy concrete blocks. You’ll need to attach a bracket to the concrete blocks, a strong bracket that can hold whatever material you’re using, metal, plastic, or wood. Mount the posts to the bracket then the fence. 

If you’re installing a home fence for permanency, sinking poles is necessary. How it is sunk and if the poles should be cemented in will depend on the material of the post for the home fence you’re building. 

So, can you install a fence yourself? Sure, its your property, right? First, you’ll want to check with your local municipality. Some may require having a contractor with certification, insurance, and licensing.  However, if you are considering building your own home fence, here are few things to consider: 

The Pros:

  • Save money on labor.
  • Your choice in material and styles.
  • The pride in a job done.

While you may have these benefits, you should know that doesn’t mean you won’t have any issues or problems, which brings us to … 

The Cons: 

  • The time to install your home fence will use up your weekend or vacation.
  • The time to research home fence instructions before you start. 
  • Shopping for the right materials and tools.
  • Knowing the property lines.
  • Filing for building permit.
  • No guarantee or warranty on the work.

Looking to get started on your home fence in Crowley and Fort Worth, TX? Call Ware Fencing at 817-948-4503 today.

How do you maintain a wooden fence?

wood fence

Do I need to seal my wood fence?

There are some neighborhoods where a chain link fence is the norm, and some neighborhoods, that aren’t really a neighborhood, no fencing is the norm. Then there are those areas, where wood fencing is the standard, and with that comes wood fence maintenance. Right away, you can see that chain link, or no fencing are more carefree, but there is something to be said about wood fence options, starting with privacy. 

Typically, in most installations, fence wood is pressure treated, meaning the wood was treated with a chemical-based solution being infused deep into the wood inside a large chamber, and then pressurizing it. The purpose of this process is to extend the lifespan of the wood once it is installed as a fence and minimize the need for wood fence maintenance. 

The weather during Texas summers can be full of sunshine, aka, blistering hot UV rays, and moisture, aka, hail, and rainstorms. Humans are advised to cautious and take preventive measures to avoid sunburns, keeping your skin healthy. This theory applies to many other things, like wood fence boards, and if they need to be protected by sealing and staining them. 

If and when to seal or stain a wood fence will depend on the type of wood. A pine wood fence is usually pressure-treated, and this provides infestation protection and makes it rot-resistant. However, if it gets very wet, and it will here in Texas storms, it will warp after it dries in the Texas sun. So, yes, pine wood fence will require some wood fence maintenance. 

So, do you seal and stain it the day it is installed? Absolutely not!  A pressure treated fence is moist from all the chemicals used to make it pressure treated. This will prevent sealant and stain from being penetrated. 

The rule of thumb for sealing and staining a wood fence is to wait at least four weeks before doing the sealing and staining.  This allows time for the chemicals to dry  and the moisture will decrease in that timeframe. It doesn’t hurt to wait as long as six weeks, but you don’t want to wait much longer, or the fence could start looking weathered, making wood fence maintenance more work. 

Should a wooden fence touch the ground?

When installing a wood fence without concrete, it should be two inches from the ground minimum. The wood post and if you’re installing rot boards, are the only parts of a wood fence that should touch the ground. With a two inch minimum, wood fence maintenance will be minimized. 

How do I keep my wooden fence from rotting on the bottom?

When it comes a wood fence, the worst enemy it can have is rot, affecting the aesthetics and compromising the rigidity and strength.  However, the following are ways that rot can be prevented with your wooden fence: 

  1. Dry Rot, Wet Rot: To combat rot, you have to understand the types of rot: dry rot and wet rot. Wet rot is caused by regular moisture contacting the wood, usually along the bottom where it may be touching the ground. You can easily identify wet rot by the cracking and softening of the wood along with a musty odor and fungus growing. Dry rot happens from continuous exposure to dry, harsh environments. This is typically caused by the sun UV rays and hot winds that will literally dry the wood out and remove the protective oils in the wood.  When wood is brittle and dry, it breaks and crumbles easily and will have a musty odor from the decaying process. 
  2. Consider the Fencing Materials: When choosing what wood to use for your fence, choose one that is rot-resistant and hardy like cedar, cypress, juniper, or redwood.  Choose the treated option and you’ll minimize the need for a lot of wood fence maintenance tasks. 
  3. Stain as Necessary: After the initial four to six-week waiting period to seal and stain your new wood fence, you need to make a routine of regularly staining it if you want to keep possible rot away, this is essential wood fence maintenance if you want a long lifespan for your fence.  The standard recommendation for staining a wooden fence is once every twelve months, but depending on environmental factors like the rainfall, soil conditions, and temperature averages, you may need to stain your fence twice a year. 
  4.  Keep Debris Clear: When debris like wet grass and leaves are allowed to build-up along the fence line, it will speed up rotting. Positioning a garden up against the fence can cause a wood fence to rot faster. Keep all foliage and grime away from your fence line as a part of your regular wood fence maintenance. 
  5. Replace Rot Promptly: As soon as you see any rot appear in your wood fence, replace the section immediately. Rot will spread and if you leave that one rot-affected board, it will spread to the rest of the fence faster than you may think. 

How many years does a wood fence last?

On the average, you can expect your wood fence to give you 15 years of beauty, privacy, and protection.  With a high level of wood fence maintenance, you can expect up to 20 years. 

stained fence

Can I stain my side of the fence?

This is a common question and has probably caused several neighborhood battles. If possible, for the sake of the wood fence lifespan, both sides of the fence should agree on sealing and staining the fence at the same time. Unfortunately, if one side doesn’t want to, there isn’t much you can do about it except keep your wood fence maintenance up to speed. 

A wood fence can give you privacy and protection, and with proper wood fence maintenance, it gives you a long life of that privacy and protection. If you’re going to the expense of having a wood fence installed, taking the time for maintenance is an investment to protecting that fence. Call 817-948-4503 today for your wood fence needs in Crowley and Fort Worth, TX.

Is installing a chain link fence hard?

roll of chain link fencing

Chain link fencing

Fences are the means of keeping animals and humans in or out, and sometimes they are for decorative purposes. Like barbed wire fencing is primarily used on farms and ranches, wood plank fencing is used for privacy around homes, and chain link fence is used primarily around homes, daycares, and other such structures.  

Chain link fence is popular around homes because it borders the property and defines boundaries while keeping children and pets in or out but keeps the view around the house open. Chain link fence and gate setups may be the most common setup for residential areas. You have your boundaries established, your children and pets are kept inside that boundary, yet it is still possible to visit with a neighbor. 

When somebody is considering a chain link fence installation as a DIY project around their home, there are a few common questions.  “How do you calculate chain link fence material?”, is the first question and an important one. You want to make sure you have enough chain link fence materials and supplies, but you don’t want leftovers either. 

By taking the time to make a list of all the items needed, you will save yourself some frustration and downtime, as well as get familiar with all the details involved in your chain link fence project. Constructing a chain link fence is a standard procedure but having the exact amount of the materials needed are going to be customized by the layout you’re installing. 

The following steps will get you a list of the amount of chain link fence with posts and other components to complete your chain link fence project:  

One: Measure the area’s length of the chain link fence planned and determine how many and the sizes of gates you’re installing. Now subtract the gate numbers and sizes form the total area length of planned chain link fence you’re installing. This will the length of chain link fence material the amount of the other chain link fence components. 

  • Notes: Double swing chain link fence gates for vehicle access come in ten foot or twelve foot width. Single chain link fence  gates for pedestrian access come in three foot and four foot widths.  Decide now which widths you need to get the right calculations as describe above. 

Two:  Count the amount of terminal posts which should include one for each corner or fence line ends, include one for each side of the gates. 

Three: Divide the number of feet of chain link fence that you have determined and divide by 10 then subtract one. For every corner post you’ll have, add one. The amount you get will be the number of line posts you need for your chain link fence project. These posts  are smaller diameter and will support the fence along each section at a space of ten feet apart. 

Four: The amount of top rail you’ll need for your chain link fence project  is the same amount of chain link fence material and is mounted between each of the corner and line post then fastened to the chain link fence for support. Add one fence tie for every two feet of top rail and one for each foot of line post.

Five: Calculate the tensioning materials starting with the tension wire which is the same amount of the chain link fence material you’re using. Add one tension wire clip for every two feet of tension wire. 

Six: Add one terminal post cap and one line post top cap to this list along with one rail end cap to each end post and gate post, plus two for every corner post. You also need an end band for every rail end of your chain link fence.

Seven: Total the gate hardware quantities should include the following:

  • Each single walk-in gate:  2 gatepost hinges and 2 gate frame hinges 
  • Each double drive-in gate: 2 each types of hinges

Eight: multiply the number of posts need by two for the amount of concrete needed to set the post. 

Do I need a top rail for chain link fence?

After reading the above steps for calculating what materials you need for your chain link fence project, you could be wondering what you could eliminate, right?  Well don’t eliminate the top rail!  Without the top rail, your chain link fence won’t last long. 

The top rails are long and will run the entire length of your chain link fence along the top to give the fencing support horizontally.  Without the top rail, the top of the fence will sag, and eventually fall to the ground in between the posts, losing its ability to keep animals and humans in or out as intended. 

You will see chain link fence up around construction areas without the top rail. Why? Because that chain link fence is only for temporary use. Once the construction job reaches a certain point, the fence will be removed and stored for the next job site. 

How far apart should chain link fence posts be?

This is another component to your chain link fence that you don’t want to cut back on. They are the smaller of the different posts used, but they are sturdy and should be spaced a minimum of 4 feet apart and no more than ten feet apart, from center of each post.  

End chain link fence post and line fence posts s should be buried six inches dee and the corner posts eight inches dee. Dig 6-inches to 8-inches for end and corner posts. All the holes should be filled with four inches of gravel in preparation of cementing them.

Do chain link fence posts need concrete?

It isn’t a law or rule to using concrete with chain link fence posts, but it does make them secure and your chain link fence will be stronger.  

close up of chainlink fence

How long does it take to install a chain link fence?

When a chain link fence is professionally installed, it will go faster because of the crew’s experience and multiple people on the job.  It typically takes one full day to dig and set the posts with cement. The crew will return the next day and begin installing the chain link, with usually 150 feet per day.  So, to determine how long it takes, it will depend on how much chain link fence you’re having installed. 

If chain link fence doesn’t match your home’s architectural style, there are chain link fence alternatives to consider: 

  • WOODEN  FOR PRIVACY

A wooden fence, also referred to as a privacy fence, is a better option for some homeowners, especially if you have a swimming pool. They are secluded and soundproof, provide a decorative yard scape feature that can be customized according to your desires and needs.  Pressure treated is recommended to withstand the climate and elements. 

  • ALUMINUM FENCING FOR STYLE AND SECURITY 

A metal fence offers durability and style that can be customized to match your home’s architecture. They do lack privacy and soundproofing but can be difficult to climb and they are rust-resistant. 

  • DURABILITY AND PRIVACY

Vinyl fencing is the most durable fence material and is perfect to replace a chain link fence. It is climate and weather resistant, insect resistant, and won’t mold or rot. For privacy desire, you can purchase it in various heights. Call 817-948-4503 today for chain link fence installation in Crowley and Fort Worth, TX.

How do you build a natural stone retaining wall?

Stone retaining wall

Separating areas of your property

Stone walls have been around for 5,000 years or more, some say since 3700 BC. They were the way landowners fenced off their property.  Today, a stone retaining wall in front of house may be for keeping the landscaping in place or keeping a house from sliding off into a valley. A stone retaining wall may be for just decorative landscaping. 

There are many stone retaining walls from those early years that still stand today. Then there are only remains and remnants of stone retaining walls that have been constructed in the past 100 years. What did they do back in 3700 BC differently than we have done in the past century to not experience stone retaining wall failure? 

Why do retaining walls fail?

The term ‘retaining wall failure’ in general does refer to a collapse and total failure of a stone retaining wall. Rather, this is the description of indicators and sign that failure is possible if the proper actions aren’t taken to save the wall. There are situations where a stone retaining wall may overturn, slide, or topple into a total collapse and cannot be recovered and repaired. However, the term retaining stone wall failure cannot be assumed as such, as inspection may deem that it is repairable. 

So, what can cause a stone retaining wall to fail? Some common causes found for a  retaining stone wall to fail: 

  • Reinforcement placement incorrect
  • Backfill saturated
  • Clogged weep holes, shoddy construction
  • Error in calculation, details, and design
  • Heavy loads unanticipated, i.e. inadequate specifications and notes 
  • Software mistakes
  • Foundation issues
  • Stone retaining wall age

How long do stone retaining walls last?

When you think about stone retaining walls, think about The Great Wall of China, part of that wall are more than 500 years old and is said to be over 13,000 miles long.  So, the average residential stone retaining wall can have a lifespan up to 100 years, depending upon a few conditions.  

Proper Design: There are six basic components of a stone retaining wall: 

  • Drainage
  • Filter 
  • Batter
  • Weep hole
  • Footing

The design of these components should be constructed so they work together with the conditions of the site.  For instance, if the batter or the backward lean isn’t sufficient for the height, the stone retaining wall will not last long. The calculations in the design have a big impact.

  • Durable materials: The materials used to construct a retaining wall will have an influence on longevity, which is why between a wood retaining wall versus a stone retaining wall, the stone has a longer lifespan than wood. 
  • Maintenance: A stone retaining wall is low-maintenance overall, but some upkeep will ensure a long lifespan. Regular inspections that the groundwater is draining from the footing drain and the weep holes are not clogged. Regardless how well a stone retaining wall is constructed, there are some factors that can compromise the construction like environmental conditions like seismic activity, soil erosion, or weather events. 

Do I need drainage behind retaining wall?

Yes, because a stone retaining wall will be impervious and water will not be able to pass through the wall, it is crucial to have efficient drainage. When drainage isn’t addressed and included in the construction,  hydrostatic pressure builds up behind the wall, then bulging or cracking will begin, damaging the stone retaining wall.

How high can you build a stone retaining wall?

A stone retaining wall uses its own weight to keep the soil on the back side. The wall will lean back into the soil and with interlocking edges, the mass resists the pressure from behind. A gravity walls are typically four to ten feet with no reinforcement. A building permit is required by most municipalities for a stone retaining wall over four feet. 

flowers on retaining wall

What is the easiest retaining wall to build?

An experienced amateur DIY homeowner should be capable of completing a more complex stone retaining wall installation or using other various materials, even building one retaining wall with steps, and sitting areas.  However, for a first time DIY job with an average do-it-yourself attempt, using masonry blocks stacked three feet high and without using any mortar to mind the stones is the simplest of all retaining walls.

When a retaining wall is necessary, for example, keeping your yard in your property line and not sliding over into your neighbor’s yard, a stone retaining wall is ideal.  It will have a longer lifespan and blend with the aesthetics of the architecture. 

A stone retaining wall can have flowers and plants added to it with a layered installation of the stones, using cylinder blocks sporadically to give the wall more appeal and color. The internet is plentiful with videos on designing and building a stone retaining wall of different heights and lengths, that will serve the purpose intended as well as complement your landscaping. Call 817-948-4503 today!

Do I Need a Pool Safety Fence?

Pool fence

What is a pool fence and why do I need a pool fence?

Congratulations!  You finally got that beautiful swimming pool installed that you’ve dreamed about and talked about for years. The perfect stone and tile, the unique shape, and all the landscaping around it are beautiful. So, when you’re your pool safety fence installation scheduled? 

Is there a law that you have to have a fence around the pool? Well, the answer is yes, maybe. Depending on where your home is located, it may be required by local laws. Most cities are, many states are making it a statewide requirement, but the main reason is that it is the smart thing to do. 

There is nothing better than having a backyard that everyone wants to enjoy. A  backyard swimming pool is fun and relaxing. It is a good place to gather family and friends for casual get together. However, without sufficient safety precautions, that place of fun and relaxation can become a nightmare tragedy.

There are approximately four hundred drownings each year in residential pools as reported by the Consumer Products Safety Commission, and that number is for kids 15 years and younger, with over 65% being children between the  ages of 1 to 3 years old. The number of severe injuries is astronomical, including back and neck injuries resulting in paralysis. Those numbers would drop drastically if pool safety fence installation had been enforced. 

Do I need a fence around my pool if my yard is fenced in?

As reported by the U.S. Consumer Product Safety Commission’s safety guidelines, a pool safety fence installation is required as a barrier around the pool. The pool safety fence must a height no less than four feet and installed around all sides of the swimming pool with a gate that can be locked when not occupied by adults. 

A barrier fence around the perimeter of a backyard is not considered as a pool safety fence installation but suggested for extra security of the homeowner. The more deterrents you have in place between the outside public, especially unsupervised children, the safer your swimming pool. 

What is the height of a fence around a pool?

There is a joke that no other mammal on earth can run as fast as a toddler when asked “What do you have in your hand?”.  There are no word with great meaning and truth to that – Toddlers are fast, inquisitive, and impulsive. Almost 300 children under the age of five drown in backyard pools every year, the second leading cause of death for children. If homeowners with swimming pools in their backyards would have the pool completely fenced in on all sides with gates that are self-closing and self-latching, that number would drastically be reduced.  

Can a boundary fence be a pool fence?

No, a pool safety fence installation must be a fence no shorter than four feet and no more than four inches from the ground. It must surround the entire pool and have a gate that locks when the pool is not occupied by adults. 

How is a pool fence different from a regular fence?

A pool safety fence installation is for the sole purpose of keeping children and pets out of the pool. They meet the standard minimum height of four feet or higher and are no more than four inches from the ground.  They come with a self-closing and self-latching feature that is high enough up small children can’t operate the latch. 

A regular fence, like the privacy fence you have around the perimeter of your yard, the border fence as some call it, can be made of many different materials and can be almost any height. Nor are the required to be self-closing or self-latching, although that would be ideal for any homeowner.  There may be local building codes that may regulate the height and the material, but state and federal law do not regulate those matters. 

fence along deck of pool area

What kind of fence goes around a pool?

An isolation pool safety fence installation that separates the pool from the yard can reduce the risk of kids drowning by over 80 percent. If 300 children die each year from accidental drowning, that pool safety fence installation would have saved 240 kids. These numbers should give you chills more than the cold water of your pool! 

So, does pool safety fence installation have to be ugly fencing? No! There are many different types of pool fences today and choosing one that matches your home’s architectural style is possible, for example: 

  • A Temporary Fence: Common, durable, lightweight, yet strong enough to keep kids out. It is placed along the edge of the pool with a few feet leeway and can be installed by any homeowner that is handy with DIY projects. Today, you can buy one that has water-filled bases instead of drilling into the concrete around the pool. The pros to this type of pool safety fence installation are the ease to install, it is inexpensive, and won’t take up as much of the perimeter. The Cons of this fencing is the quality may not be as good between brands, the poles are easy to bend down even by children. 
  • A Traditional Fence: This fence is the first line of defense between neighborhood kids and your pool.  This is a more expensive way to fence your pool, but with the options from wood to wrought iron, it could be the backyard decorators’ dream.  What materials does the traditional fence come in? 
  • Metal: Choose from chain link to wrought iron, you’ll be at the lower end of cost for this pool safety fence installation and still have a good quality fence. Metal fencing will be durable and rust-resistant, a great feature around a swimming pool. The pro of metal pool safety fence installation is an easy installation. They can be made more decorative with slates installed in the links of a chain fence and wrought iron is the most decorative. The cons to this type of fencing when you go with a chain link, you lose a decorative backyard. The damaged fence requires a whole section replaced.  
  • Wood: A wooden privacy fence is the most common in neighborhoods around the country. They have various patterns and styles, isn’t that expensive to have installed a professional or DIY project. The pros of this type of fencing are it meets the guidelines set by the U.S. Consumer Safety Product Commission and with the solid format of board-next-to-board, children can’t slip through. This is a durable material and will give you years of longevity, painted or stained.  The drawback to the wooden fence as a pool safety fence installation, they require upkeep, boards and post need replacing from time-to-time, and if the ground around your property is uneven, installation is a problem. 
  • Vinyl: This type of pool safety fence installation will look a lot like a wooden fence, but is low-maintenance. The pros to this type of fence are the low maintenance, it is aesthetically pleasing with any architectural style home, and has a lifespan of 30 years or longer.  The cons are the cost, cementing the posts are required, and repairs are not cheap.
  • Glass: A luxury pool safety fence installation, and expensive, must be installed by a professional, the maintenance is ongoing, and the repairs are expensive. The pros of this fencing are the beauty and durability and allow your pool to be the showcase of your backyard.  

On Pool Safety Fence Installation

No matter what style and type of swimming pool fence you choose, the best safety for kids around a swimming poos is an attentive adult. Keep your eyes on the kids at all times, save your phone, and reading for another time. If you feel you can’t watch multiple children at one time, enlist help or cancel the swimming pool activity. Need a pool fence installation in Crowley and Fort Worth, TX? Call 817-948-4503 today.

What do you put under flagstone walkway?

flagstone walkway

A path in your garden

The use of flagstone for walkways has become more popular over the last 25 years. What exactly is flagstone though and what makes a flagstone walkway so beautiful? This sedimentary rock is split into layers alongside bedding and is typically a combination of feldspar and quartz that form the sandstone with arenaceous in grain size. 

Calcite, iron oxide, and silica bind flagstone together, giving it that generic, yet unique look, that is cut in regular rectangular shape or square shape. The popularity of this stone is used for fences, flooring, patios, roofing, and most commonly to create a flagstone walkway. 

Homes where the driveway is in the front, many homeowners are installing a flagstone walkway next to driveway with recessed flood lighting the way. With that combination, any architectural style home has an elegant appearance with safety in mind. High-end homes have a flagstone walkway and stairs leading to the front door, where stylish outdoor lights make a warm and welcoming entry. 

Is flagstone cheaper than pavers?

Let us provide this analogy: A  flagstone walkway is fine cabinetry that paver walkway is Ikea stone. So, with that analogy, that should answer your question: A flagstone walkway is going to be more expensive than a paver walkway. 

Does that mean you shouldn’t consider using pavers? Absolutely not! You need to choose the material for your home’s patio and walkway based on two things:  

  • Your personal style
  • Your personal budget

If you’re considering creating a patio or walkway, the hardscape industry has a constant stream of new products introduced every year. Most of the new products, marketed as “cobble stone” or “rustic stone”  are really just concrete pavers that mimic natural stone like flagstone. 

Walkways and patios can look just as good, but you need to realize the difference in the materials so that you can plan how to install them if you’re doing the job yourself. A professional contractor that has experience in creating flagstone walkways and patios will know the difference in materials and how to install the material. 

Getting to the dollars and cents of this question, the cost of a flagstone walkway can vary based on where you live. In this area, Texas, Arizona, California, flagstone is easier to come by because of the ground in the Southwest area.  Areas up north, like Pennsylvania, New York, this natural material has to be shipped in, thus it is going to cost more. 

Consider the value and your ROI before you turn away from installing a flagstone walkway. If you’re sprucing up your home on the cheap for a fast sale, then go with the pavers. However, if you want a permanence to your landscaping, something that you’ll enjoy for years to come, splurge for the flagstone walkway. 

Can you lay flagstone on dirt?

Yes, you can, and you can do this with or without a grass/weed blocking material between the flagstone and the dirt.  Flagstone walkway is a common landscaping addition along with flagstone patios, small retaining walls, and steps. Flagstone is reasonably heavy, so laying it directly on the dirt for a walkway, grass will grow up between the stones, giving it a rustic appearance. 

How do you prepare the ground for flagstone?

Once you have measured the area where you want to create your flagstone walkway or patio, and have purchased the amount of flagstone you’ll need, follow these steps:

  • Step One: Dig 3 to 6 inches deep in the area you’ll be laying your flagstone. Next, break up the clumps and smooth the area with a rake. If there is any grass, rocks. trash, or weeds, get them out of the area your paving.  
  • Step Two: Lay one piece of your flagstone in the prepared area, turning the stone side to side to work it into the dirt. Using a level, make sure it is level, yet with a slight pitch away from your house. 
  • Step Three: Using a hammer’s butt end, pack the dirt around the edges of the flagstone,  then make sure it doesn’t wobble by standing on it. 
  • Step Four: Lay more flagstones around and next to the first piece, adjusting them so they are two finger widths apart. Using the same hammer, knock off the corners so they fit together better, but keep the corners and edges looking natural. 
  • Step Five: Check each piece with the level, making sure they are flat with that same slight pitch away from the house for drainage. With the hammer’s but end, pack dirt around the edges. Repeat until all flagstone pieces are laid. 
  • Step Six: Sweep over the flagstones to remove any excess dirt to keep them in place and then rinse off with a light spray setting on the water hose nozzle. Let it dry for three to four hours, or longer, before walking on your flagstone walkway. 

What should I put between my flagstone?

In addition to the excess dirt you sweep off in between the stones, pour sand over the flagstones and then sweep it into the spaces. The fine granules of sand will fill in the space and keep them in place. 

flagstone patio close up

How long does a flagstone patio last?

A professionally installed flagstone walkway or patio can last up to ten years before any major repairs or redo is needed. If you don’t want to use sand to settle the flagstones, you can combine flagstone walkway cement to a permanent path.  

Wash the flagstones to remove all quarry dust. Next mix a batch of Portland cement with concrete sand, creating a fairly stiff consistency (2 parts sand to 1 part cement). Then spread enough cement, 1″ deep is typical, and place one flagstone. Using a rubber mallet tap the stone into the cement and continue this until the flagstone walkway is complete. 

A flagstone walkway is a beautiful, natural stone that will give any home a gracious entrance. Whether you’re in your home forever or you plan to sell sometime in the future, a flagstone walkway or patio will give you years of enjoyment or a boost for an ROI when sold. Call 817-948-4503 today for your flagstone pathway installation.

What is an Effective Ranch Fence?

Pipe and Cable Fence

What is Pipe Fencing?

Ranching in Crowley and Fort Worth, TX requires a strong and durable fence to keep larger animals inside the premises while keeping them away from specific parts of the land. When considering your options, a pipe and cable fence should be considered as one of the top choices for your property. Also being known as Texas Primer, used in tandem with thick and high strung wiring which both keep animals at bay while not injuring them as well. Whereas barbed wire is well known to be detrimental to cows and horses, the high strung wiring is known to be strong enough to withstand the animals’ weight while simply deflecting their best efforts. More than that, benefits of a pipe and cable fence include:

  • Several materials to choose from
  • Resistance to rust and corrosion 
  • Tough against heavyweight (animals) 
  • Relatively easy installation
  • Wiring can be added for smaller animals

A pipe fence also does not simply have to be used on ranch or farm land either, being highly capable of being installed on patios and overlooks. As a fence that handles animals that weigh over a thousand pounds, it can easily sustain a more casual setting as well. Ware Fencing can by and large make installations as well as repairs when you need a pipe and cable fence. Call 817-948-4503 today to schedule your appointment.

How far apart should pipe fence posts be?

Being relatively cheaper than wooden and vinyl fences, a pipe and cable fence is a perfect choice for property owners. To get the best result from our pipe fence, however, the correct installation will be absolutely necessary. In getting an installation from Ware Fencing, you will see correct: 

  • Length between posts
  • Saddling 
  • Distance in the ground posts are set into
  • Wiring
  • General set up

Each of these factors are extensively important during the setup process as paying too little attention to any results in a severely weakened fence. As such, pipe fences should generally have a 15-foot separation between posts when the land is flat or relatively close to even. At every 125 to 150 feet, a terminal post should be placed. With this process, you should achieve the optimal efficiency out of your fencing. However, none of that will matter if you do not support each fence post correctly into the ground. Each hole that a post goes into should be ⅓ to ½ of the length of the height of your post, each. At the same time, it would be wise to accompany these posts with gravel or something similar to help with the drainage. This prevents metal deterioration by a massive degree.

How do you make a cable fence pipe?

The production and installation of a pipe and cable fence can seem like an arduous process, but it is one that can be extremely beneficial to you. However, the materials the fence is made up of is just as important to how the fence is set up, arguably more being that the materials make it last. Making the fence out of a metal that does not rust or degrades as fast is therefore highly important for the long-lasting appeal this type of fence usually boasts. Steel in this case is the perfect material to resist the elements and the test of time. While the top part (drill stem) of the rods is hollow, the lower parts (sucker rods) are thick and do not move when placed firmly into the ground. As a common feature all over Texas, these fences last beyond what most people expect with a regular 25 to 50 year lifespan. That’s not to mention the wiring, which is made from either galvanized steel or high-tensile steel, tile wrapped with other strands to make a larger mass, and extended throughout the posts. This material in itself is used not only for fencing but also to hold together extremely heavy materials. That’s not to say that when being a barrier to an animal, an animal will need to be crafty at minimum to get through instead of just throwing its weight around. 

Pipe and Cable Fence

Should I use concrete for fence posts?

For any fence, having a concrete base is the single best way in bettering it’s stability against weight impacting it and remaining upright. With regular fences, one would be highly considerate in using concrete during the installation process of a fence to better ground each post that is placed down. With each post, in contrast, you would measure the distance of the post, how much concrete you would need, and how much water is necessary to mix the concrete to peak hardness in the hole around the post. However, when it comes to a pipe and cable fence, you will want to weight how long the process will take versus if you actually need concrete in the first place. While it will greatly increase the strength of your fence, it will also add a considerable amount of time to the process, much less placing every single fence post. With each fence post being buried a third of it’s height, it should be relatively safe to assume it is strong without concrete unless there is something strangely soft about the soil. The ultimate choice is up to you, in that we can help with when you call 817-948-4503 to make an appointment. Ware Fencing is ready to install your fence when you call today.